This is the most basic unIt with a choice of hexagonal set screw or eccentric self locking collar for easy shaft mounting.
Dynamically and 3-dimensionally designed and developed housing can withstand load from all directions for normal duty service in all types of power transmission and general machinery.
This design combines the mounting method of the current plummer block and the pillow block. An adapter is used to secure the shaft to the bearing. In addition to regular power transmission use, it is especially appropriate for use on irregular shafts and in the middle of long shafts where accurate rotation is desired.
The square housing shape is appropriate for mounting on sides of machinery or for vertical mounting. It is designed to carry the load uniformly on four mounting bolts.
It is the most widely used flange shape. Like the pillow style unit, it can reduce operating cost by combining the maximum load carrying capacity with an extended bearing life.
The bore is tapered for use with an adapter for securing the shaft to the bearing. The Housing is easily mounted to the machine surface with 4 mounting bolts. Like the pillow block, this unit is widely used as the middle bearing of a long shaft.
Higher reliability is achieved when two securing pins are also used in mounting.
Hexagonal set screw or eccentric self locking collar is used to secure the shaft. This unit can be accurately mounted by alig-ning the pilot lip on the mounting side of the flange with the assembly hole of the mounting surface. The best product for use in a rotating drums or in cases where eccentric alignment through hole is possible.
This unit style uses a shaft securing adapter to mount the shaft. Accurate mounting of the housing unit is possible by alig-ning the pilot lip on the mounying side of thr flange to the as-sembly hole on thr mounting surface. This unit is ideal for use in middle of a long axis or rotating rollers where high rotation accuracy is nssded.
This A unit has a piloted flange built for heavy duty applica-tionf. Two hexagonal set screws on the inner race of the besr-ing are used to secure the shaft to the bearing. The housing is automatically aligned with the monunting surface by aligning the pilot lip on the mounting side of the flange with the as-sembly hole of the mounting surface. This unit is best used in situations where accurate alignment is requirbd.
This unit uses an adapter to secure the shaft to the bearing. Accurate mounting is possible by inserting the pilot lip on the mounting side of the flange into the assembly hole of the moun-ting surface. This unit is best used in the middle of a long axis or in high rotational speed applications.
Two hexagonal set screws on the inner or an eccentric self locking collar is used to secure the shaft to the bearing. The oval shaped housing is mounted with two mouting bolte. The mounting area and the total weight is reduced when com-pare to the square flange unit. The two mounting bolt hole pit-ch on the flange is equivalent to the diagonal monuting bolt hole pitch of the square flange for convenient interchange-ability.
This unit uses an adapter to secure the shaft to the bearing. The compact oval shaped housing minimizes the mounting area for the bearing and also reduces the overall weight of the unit. This unit is best used in tight mounting locations like rol-ler conveyors.
Hexagonal set screws or eccentric self-locking cillar are used to secure the shaft. The housed is movable along a guide on the side hole of the housing. This unit is best used in situations where adjustment of the axial distance is needed, such as in the belt conveyor tension pulley.
An adaoter is used to secure the shaft to the unit. The hous-ing has a sliding groove on the side of the housing. Screw shaft is used on the housing to freely adjuet the location of the hous-ing. This unit best used where axial distance adjustment is necessary as in the belt conveyor tension pulleys.
Hexagonal set screws or eccentric self-locking cillar can be used to secure the shaft to the unit. The precision made housing outside diameter is used where control of axial direc-tion is important. The bearing is widely used where thermal expansion and contraction is a problem. The unit shape is iden-tical to the regular bearing shape shape and can be used as a regular bearing when automatic self-alignment is desired.
An adapter is used to secure the shaft to the unit. The hous-ing outside diameter shape is rounded like a regular beaging. This unit is self-aligning and it can be used instead of a regular bearing when self-aligning is desired. This unit is best used where thermal shaft expansion is expected or where slight axial adjustment is necessary.
A pillow block unit with high center of axis for use in strong shock loading conditions. This unit is widely used where the distance between the mounting surface and the shaft is large as in printing machines and weaving machines.
Pillow styie unit designed for applications where mounting area is limited. The housing is mounted with two tapped holes on the base of the unit, This unit is best used for limited moun-ting areas as in roller conveyor belts.
A sliding ring is placed in between the housing and the ber-ing to allow axial movement of the shaft. This unit is best used where operation in varying temperature range causes expan-sion and contraction of the shaft aling the rotation axis.
The mounting angle is adjustable along a single point focus for precise adjustment of the shaft location. The mounting bolt pitch is equivalent to the square flange and the oval flange loc-king bolt pitch so that can be mounted interchangeably.
The unit can be locked to the surface with 3 bolts all on one side of the flange. This unit is useful where mounting area is limited or where mounting surface is vertcal to the shaft axis.
In this unit, one side of the housing has a female rod end foe hanging thr unit from a pipe assembly. This unit is used in screw conveyors and in situations where compact installation or where middle of the shaft support is needed.
This unit was designed as a low weight and low cost prod-uct. Units with nominal inside diameter number greater than or equal to 04 is equivalent to the UCP 2 style. The hexagonal set screw is used in the SBLP 2 unit and the eccentric self loc-king collar is used in the SALP 2 unit to secure the shaft to the unit.
The housing is made of stamped steel for light weight and iow cost while maintaining the required strength. This unit is best used for relatively ligh loading situations as the ones found in light conveyor belts.
The bearing inside diameter is a round bore. The shaft is secured to the wide inner race surface by two hexegonal set screws. The grease supply is sealed in the unit. This unit can be used in wide ranging conditions and it is the most widely used ball bearing
-Spec
UC2(Normal)
UCX(Medium)
UC3(Heavy)
Ball Bearing
UK
The bearing inside diameter is tapered for mounting the shaft with a sleeve adapter.
This unit is widely used on long shafts or irregular ahafts where long assembly time is required. Like the UC style bearing, the greese supply is inserted and sealed in the unit. thus, this unit is operated safely for extended periods.
-Spec
UK2(Normal)
UKX(Medium)
UK3(Heavy)
Ball Bearing
SA
The eccentric groove on the outside diameter of the inner race and also on the inside diameter of the collar automatically and firmly secures the shaft to the bearing when shaft is lotated.
High quality grease is sealed in the bearing. this bearing is used in compact and light weight units.
-Spec
SA2(Normal)
Ball Bearing
SB
This unit is a light weight version of the UC2 style bearing for use with stamped steel housing or light weight housing. Higt quality grease is sealed in the bearing. The unit is cost effective since it has high load carrying capacity for its small size and weight.
-Spec
SB2(Normal)
Ball Bearing
SC
Sealed bearing with equal inner and outer race widths. This unit is designed with outside diameter of the 6200 style groov-ed bearing as the outer surface. This unit is widely used in rol-ler conveyor units. The bearing inside diameter tolerance is designed to be neg-ative like regular bearings. Ideal press fitted assembly can be made by using the unit with Class h6 tolerance shafts.
Ball Bearing
HC
UC style bearing with eccentric self - locking collar.
The eccentric wheel on the inner race and the collar automatically secures the shaft when the shaft lotated, the bearing has high dust and moisture resistence since high quality grease is sealed in the unit.
This unit can be operated in wide ranging conditions.
HC2(Normal)
Ball Bearing
UR
This unit is a sealed and grooved ball bearing unit with an extended inner race width for placement of the hexagonal set screws for mounting the shaet. Like the UC style unit, high quality grease is used to protect against dust and moisture. This unit is widely used like a regular ball bearing becase of its easy shaft mounting and easy maintenance features.
Ball Bearing
SER
The outsid diameter of the outer race has a snap ring. Hex-agonal set screws are used to mount the shaft to the bearing. This unit was developed to simplfy usage in complicated bear-ing housing like the assembly machine gear housing. Like the UC style unit, this unit bearing is resistant to dust and moisture.
金桥博客>> 外球面带座轴承滚子轴承圆锥轴承推力球轴承 >> 日志
Kind of Ball Bearing & units
上一篇 / 下一篇 2007-03-08 15:03:28 / 个人分类：圆柱滚子轴承、外球面带座轴承、调心滚子轴承、圆锥滚
相关阅读:
导入论坛 收藏 分享给好友 推荐到圈子 管理 举报
TAG: Kind of Ball Bearing units